RAS Chemistry & Material ScienceЖурнал физической химии Russian Journal of Physical Chemistry

  • ISSN (Print) 0044-4537
  • ISSN (Online) 3034-5537

Structure and Properties of Composite Materials Sintered at High Pressure and Reinforced with Amorphous Boron Particles

PII
10.31857/S0044453723010193-1
DOI
10.31857/S0044453723010193
Publication type
Status
Published
Authors
Volume/ Edition
Volume 97 / Issue number 1
Pages
21-25
Abstract
Metal matrix composite materials (CMs) reinforced with boron particles are synthesized from powders of amorphous boron and metal (Ni, Ti) at a pressure of 8 GPa and temperatures of 500–1000°C. It is established that amorphous boron crystallizes during synthesis at temperatures above 800°С. Amorphous boron particles are characterized by a hardness of ~30 GPa, an indentation modulus of elasticity of up to 270 GPa, and an elastic recovery of more than 60%. The patterns of boride formation during high-pressure synthesis are studied. It is shown that the wear resistance of a Ni–B CM synthesized at 600°С grows by more than 30 times, relative to the wear resistance of pure nickel. Reinforcing titanium with 30% amorphous boron increases wear resistance by more than two orders of magnitude, but the coefficient of friction of CMs is reduced slightly.
Keywords
композиционные материалы аморфный бор термобарический синтез кристаллизация твердость трибологические свойства
Date of publication
12.09.2025
Year of publication
2025
Number of purchasers
0
Views
7

References

  1. 1. Shah F.U., Glavatskih S., Antzutkin O.N. // Tribol. Lett. 2013. V. 51. № 3. P. 281. https://doi.org/10.1007/s11249-013-0181-3
  2. 2. German R.M., Mar R.W., Hastings J.C. // Ceram. Bull. 1975. V. 54. № 2. P. 178.
  3. 3. Kalanadze G.I., Shalamberidze S.O., Peikrishvili A.B. // J. Solid State Chem. 2000. V. 154. P. 194. https://doi.org/10.1006/jssc.2000.8835
  4. 4. Brodhag C., Thevenot F. // J. Less-Common Met. 1986. V. 117. P. 175. https://doi.org/10.1006/jssc.2000.8835
  5. 5. Екимов Е.А., Садыков Р.А., Громницкая Е.Л. и др. // Неорган. матер. 2006. Т. 42. № 5. С. 538.
  6. 6. Ekimov E.A., Sidorov V.A., Sadykov R.A. et al. // High Pressure Res. 2007. V. 27. P. 179. https://doi.org/10.1080/08957950601101902
  7. 7. Chernogorova O., Drozdova E., Ovchinnikova I. et al. // J. Appl. Phys. 2012. V. 111. P. 112601. https://doi.org/10.1063/1.4726155
  8. 8. Черногорова О.П., Дроздова Е.И., Блинов В.М., Бульенков Н.А. // Росс. нанотехнол. 2008. № 5–6. С. 150.
  9. 9. Talley C.P. // J. Appl. Phys. 1959. V. 30. № 7. P. 1114.
  10. 10. Bhardwaj J., Krawitz A. // J. Mater. Sci. 1983. V. 18. P. 2639.
  11. 11. Диаграммы состояния двойных металлических систем: справочник в 3-х т. / Под ред. Н.П. Лякишева. М.: Машиностроение, 1996.
  12. 12. Leyland A., Matthews A. // Surf. Coat. Technol. 2004. V. 177–178. P. 317. https://doi.org/10.1016/j.surfcoat.2003.09.011
QR
Translate

Индексирование

Scopus

Scopus

Scopus

Crossref

Scopus

Higher Attestation Commission

At the Ministry of Education and Science of the Russian Federation

Scopus

Scientific Electronic Library