- PII
- S3034553725110094-1
- DOI
- 10.7868/S3034553725110094
- Publication type
- Article
- Status
- Published
- Authors
- Volume/ Edition
- Volume 99 / Issue number 11
- Pages
- 1673-1681
- Abstract
- This study explores the potential use of iron oxide powder — an industrial by- product from the manufacture of organic dyes — as a raw material for producing oxide catalysts. The physicochemical properties of the initial material and samples subjected to different types of treatment (mechanochemical activation, ultrasonic processing in oxalic acid solution) were investigated using X- ray diffraction, Mössbauer spectroscopy, scanning electron microscopy, and low- temperature nitrogen adsorption. It was established that optimal physicochemical characteristics are achieved through combined treatment: ultrasonic dissolution in oxalic acid followed by calcination at 425°C. Mechanochemical activation and ultrasonic processing enable the regulation of the composition and properties of the resulting oxides (substructural characteristics, dispersion, specific surface area, and porous structure). These processing methods allow for the formation of properties required for most catalysts used in the steam reforming of carbon monoxide and biomass pyrolysis.
- Keywords
- оксид железа механохимическая активация ультразвуковая обработка катализаторы физико-химические свойства железосодержащее сырье
- Date of publication
- 20.05.2025
- Year of publication
- 2025
- Number of purchasers
- 0
- Views
- 26
References
- 1. Apostolescu N., Geiger B., Hizbullah K. et al. // Appl. Catal. B: Environ. 2006. V. 62. P. 104.
- 2. Hamad K.I., Humadi J.I., Issa Y.S. et al. // Cleaner Eng. Technol. 2022. V. 11. P. 100570. https://doi.org/10.1016/j.clet.2022.100570
- 3. Nuengmactha P., Kuyyoguy A., Porrawatkul P. et al. // Water Sci. Eng. 2023. V. 16. I. 3. P. 243. https://doi.org/10.1016/j.wse.2023.01.004
- 4. Khan M.I., Alrobei H., Ilyas M. et al. // Surf. Rev. Lett. 2024. V. 16. I. 9. P. 941. https://doi.org/10.1166/sam.2024.4711
- 5. Schlicher S., Schoch R., Prinz N. et al. // Catalysts. 2024. V. 14. P. 416. https://doi.org/10.3390/catal14070416
- 6. Ma J., Mao X., Hu C. et al. // J. Am. Chem. Soc. 2024. V. 146. P. 970. https://doi.org/10.1021/jacs.3c11610.
- 7. Humphreys J., Lan R., Tao S. // Adv. Energy Sustainability Res. 2021. V. 2. P. 2000043. https://doi.org/10.1002/aesr.202000043
- 8. Liu H., Han W., Huo C. et al. // Catalysis Today. 2020. V. 355. P. 110. https://doi.org/10.1016/j.cattod.2019.10.031
- 9. Hasany F.S., Abdurahman H.N., Sunarti A.R. et al. // Curr. Nanosci. 2013. V. 9. I. 5. P. 592. https://doi.org/10.2174/15734137113099990065.
- 10. Lassoueda A., Dkhilb B., Gadri A. et al. // Results in Physics. 2017. V. 7. P. 3007.
- 11. Khana I., Morishitaa S., Higashinaka R. et al. // J. Magn. Magn. Mat. 2021. V. 538. P. 168264. https://doi.org/10.1016/j.jmmm.2021.168264
- 12. Mitar I., Guc L., Soldin Z. et al. // Crystals. 2021. V. 11. P. 383. https://doi.org/10.3390/cryst11040383
- 13. Calderon Bedoya P.A., Botta P.M., Bercoff P.G. et al. // J. Alloys Compd. 2023. V. 939. P. 168720. https://doi.org/10.1016/j.jallcom.2023.168720
- 14. Ogbezode J.E., Offia-Kalu N.E., Bello A. et al. // JALMES. 2024. V. 7. P. 100103. https://doi.org/10.1016/j.jalmes.2024.100103
- 15. Лапшин М.А., Румянцев Р.Н., Ильин А.А. и др. // ЖПХ. 2017. Т. 90. № 7. С. 853.
- 16. Pepper R.A., Couperthwaite S.J., Millar G.J. et al. // J. Environ. Chem. Eng. 2017. V. 5. I. 3. P. 2200.
- 17. Румянцев Р.Н., Ильин А.А., Ильин А.П. // Изв. вузов. Химия и химическая технология. 2013. Т. 56. № 6. С. 45.
- 18. Kumara R., Sinhaa A., Mondal G.C. et al. // Arab. J. Chem. 2020. V. 13. I. 1. P. 134. https://doi.org/10.1016/j.arabic.2017.03.001
- 19. Fan J.H., Wang H.W., Wu D.L. et al. // J chem technol biot. 2011. V. 86. I. 10. P. 1295. https://doi.org/10.1002/jctb.2672
- 20. Oh S.Y., Cha D.K., Kim B.J. et al. // Environ. Toxicol. Chem. 2005. V. 24. I. 11. P. 2812.
- 21. Prabakar S., Mayakannan M., Vinoth E. // NanoNEXT. 2021. V. 2. I. 1. P. 1. https://doi.org/10.34256/nnxt2111
- 22. Ильин А.А. // ЖРХО им. Д.И. Менделеева. 2019. T. 63. № 2. С. 37. https://doi.org/10.6060/rcj.2019632.7
- 23. Китайгородский А.И. Рентгеноструктурный анализ мелкокристаллических и аморфных тел. М.: Книга по Требованию, 2013. 590 с.
- 24. Румянцев Р.Н., Ильин А.А., Ильин А.П. и др. // Изв. вузов. Химия и химическая технология. 2014. Т. 57. № 7. С. 80.
- 25. Шабашов В.А., Литвинов А.В., Мукосеев А.Г. и др. // ФММ. 2004. Т. 98. № 6. С. 38.
- 26. Ломаева С.Ф., Маратканова А.Н., Немцова О.М. и др. // Химия в интересах устойчивого развития. 2007. № 2. С. 103.
- 27. Чекин В.В. Мессбауэровская спектроскопия сплавов железа, золота и олова. М.: Энергоиздат., 1981. 107 с.
